Snmp-Server Host - Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide N to Z

snmp-server host

To specify the SNMP version, community, UDP port, trap category and trap severity:
Syntax
snmp-server host ipAddress [ version ver ] securityString [ udp-port port ]
[ trapCategory ]* [ trapFilters trapFilter ]
no snmp-server host ipAddress
To specify the ping timeout and trap queue:
snmp-server host ipAddress pingTimeOut timeOutValue
[ trapQueue { drainRate queueDrainRate | full queueFull |
size queueSize }
[ drainRate queueDrainRate | full queueFull | size queueSize ]*]
snmp-server host ipAddress trapQueue
{ drainRate queueDrainRate | full queueFull | size queueSize }
[ drainRate queueDrainRate | full queueFull | size queueSize ]*
[ pingTimeOut timeOutValue ]
no snmp-server host ipAddress { pingTimeOut | trapQueue { drainRate | full | size
} }
Command introduced before JUNOSe Release 7.1.0.
Release Information
ip keyword added in JUNOSe Release 7.1.0.
packetMirror keyword added in JUNOSe Release 7.2.0.
Configures one or more hosts to receive an SNMP trap. The no version removes the
Description
specified host from the list of recipients.
Options
1188
snmp-server host
ipAddress IP address of the SNMP trap recipient
ver SNMP protocol version for traps sent to host; one of the following values:
v1, v2c, or v3
securityString SNMP community string
port UDP port number of SNMP trap recipient
trapCategory SNMP trap category
addrPool Local address pool traps
atmPing E Series router proprietary ATM ping traps
bfdmib BFD MIB traps
bgp BGP state change traps
bulkstats Bulkstats file full and nearly full traps
cliSecurityAlert Security alerts traps