Default Outbound Wan/Wwan Ports - Digi IX20-WAG4 User Manual

Interfaces
4. Save the configuration and apply the change:
(config)> save
Configuration saved.
>
5. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.

Default outbound WAN/WWAN ports

The following table lists the default outbound network communications for IX20 WAN/WWAN
interfaces:
Description
Digi Remote Manager connection to my.devicecloud.com
NTP date/time sync to time.devicecloud.com
DNS resolution using WAN-provided DNS servers
HTTPS for modem firmware downloads from firmware.accns.com
IX20 User Guide
Wide Area Networks (WANs)
TCP/UDP Port number
TCP 3199
UDP 123
UDP 53
TCP 443
128