Table of Contents
Advertisement
MITSUBISHI CNC
1 Operating the Setting and Display Unit
1.8 Menu List
The menu list is a function that displays each screen's menu configuration as a list. The Menu list window opens when
the [MenuList] key is pressed on each screen.
If a pop-up window other than the menu list is displayed, the Menu list window appears above the displayed pop-up
window. The menu does not change in this case.
If the [MenuList] key is pressed again or if the [Cancel] key is pressed while the Menu list window is open, the Menu list
window closes, and the state before the [MenuList] key was pressed is recovered.
(1)
(2)
(3)
Display items
Display item
(1)
Screen name
(2)
Menu name
Function outline display
(3)
area
I - 16
The screen name is displayed.
(Example) Monitr/Setup
A list of the menu names (functions) included on each screen is displayed.
(Example) Search/Reserch
An outline of the currently selected menu name (function) is displayed.
Details
Advertisement
Table of Contents
