Table of Contents
Advertisement
MITSUBISHI CNC
3 Setup Screens
Operation method (Changing a group No.) (L system)
(1)
Press the [Grp No. change] menu.
Designate the group No. after changing.
(2)
112 [INPUT]
(Note)
An error occurs if the group No. duplicates a pre-existing group No.
Operation method (Setting the tool life data) (L system)
Move the cursor to the data to be set using the
(1)
, [ ↑ ], [ ↓ ], [ | ← ] and [ → | ] keys.
It is possible to move to the line after the registered
line.
Set a tool No. for this line to newly register tool life
management data.
Set a value.
(2)
20 [INPUT]
(Note 1) It is not possible to set any other data if the tool No. and compensation No. have not been set.
Operation method (Copying/pasting the tool life data) (L system)
(1)
Move the cursor to the line to be copied.
(2)
Press the menu [Line copy].
Move the cursor to the line where the data is to be
(3)
pasted.
(4)
Press the [Line paste] menu.
(Note 1) Once copied, the data is held until a new data item is copied.
Operation method (Erasing one line of tool life management data) (L system)
(1)
Move the cursor to the line to be erased.
(2)
Press the menu [Line clear] and [INPUT] keys.
(3)
Press the [Y] or [INPUT] key.
Press a key other than [Y] or [INPUT] in order not to
erase the data.
I - 190
The menu is highlighted.
The group No. changes to "112".
,
The set value displays.
The cursor moves one position to the right.
The background color of the copied data changes to light blue.
The copied tool life management data is written to the data in
the line where the cursor is located.
The background color returns to normal.
The cursor moves to "Tool No.".
The menu is highlighted.
A message displays confirming whether it is okay to erase the
data.
The background color of the area where the data is erased
changes to light blue.
One line of the selected life management data is erased and
the menu highlight returns to normal.
The next line moves up after erasing.
Advertisement
Table of Contents
