Changing The Valid Area - Mitsubishi Electric E70 Series Instruction Manual

MITSUBISHI CNC
4 Edit Screens

4.4.1 Changing the Valid Area

It is necessary to enable the areas including device, directory, and file name in the file setting column A or B in order to
set those items.
Change the display area using the [ ← ],[ → ], direction cursor keys or the [ | ← ],[ → | ] tab keys
File setting field A is valid.
Changing file setting column B to a valid area (refer to upper right diagram)
(1)
Press the [ → ] or [ → | ] key
Changing file setting column A to a valid area (refer to upper left diagram)
(1)
Press the [ ← ] or [ | ← ] key.
I - 264
File setting field B is valid.
File setting column B changes to a valid area.
File setting column A changes to a valid area.