Table of Contents
Advertisement
MITSUBISHI CNC
4 Edit Screens
4.2.14 Copying/Pasting Data
Operation method (Copying)
(1)
Press the [Line copy] menu.
Designate the range to be copied.
(2)
(Ex.) From line 8 to line 10
8/10 [INPUT]
When copying 1 line, it is also possible to make a
selection using the [ ↑ ] and [ ↓ ] keys and
designate by pressing the [INPUT] key.
Notes when copying
(1) If [INPUT] key is input without setting a line No., the line where the cursor is at is copied.
(2) The highlight of the copy target lines disappears when editing operations are resumed.
(3) If the file is edited after the Line copy menu is pressed, the data copied in the line is canceled.
(4) If the last line of the file is the range to be copied, the last line can be designated as "E".
(Example) From 8th line to last line : 8/E
(5) The copied data is maintained while the copy source file is opened even if the display type or editing area is
switched to another one.
Operation method (Pasting the copied data)
Move the cursor to the line where the data is to be
(1)
pasted.
(2)
Press the [Line paste] menu.
(3)
Press the [INPUT] key.
(Note 1) With multi-program display type, data can be copied and pasted between both left and right areas.
(Note 2) "Executing" is displayed in flickering during line paste.
I - 226
The menu is highlighted.
The cursor appears at the lower input area.
The background color for the range to be copied turns light
blue.The menu highlight returns to normal.
The copied data is inserted in the line before the cursor
position, and "Editing" appears.
The edited machining program is saved to device, and
"Editing" disappears.
Advertisement
Table of Contents
