4.4.7 Creating a Directory
This section explains the method used to newly create a directory.
Refer to "4.5.2 Selecting a Device, Directory, and File" for details of the device, directory, and file specification method.
Operation method
Use the [ ← ] or [ | ← ] key to select file setting
(1)
column A.
(2)
Designate the device
Select a directory to be newly created from the list,
(3)
or designate by inputting from the input area.
Set the new directory in the input area and press
(4)
[INPUT] key.
(5)
Press the [Dir create] menu.
The directory can also be created in file setting area
B.
(Note 1) Make sure that the directory path is less than 100 characters. When the path exceeds 100 characters, it
cannot be recognized as a path.
E70 Series Instruction Manual
The designated device name appears. USB memory and
memory card is the device to make directory.
The designated details appear.
The set directory name appears.
The directory is created.
4.4 Program Input/Output
I - 275