Table of Contents
Advertisement
MITSUBISHI CNC
Appendix 8 User Parameters
【#9733】 Host2 password
Set the password when logging into the host computer.
---Setting range---
15 characters (alphanumeric) or less
【#9734】 Host2 directory
Set the directory name of the host computer.
The directory released to the client (NC unit) with the host computer's server is handled as the root
directory by the NC unit.
---Setting range---
31 characters (alphanumeric) or less
【#9735】 Host2 host type
Select the type of the host computer.
0: UNIX/PC automatic judgment
1: UNIX
2: PC (DOS)
(Note) When "0" is set, the settings for the following parameters will be invalid.
- #9736 Wrd pos: name
- #9737 Wrd pos: size
- #9738 Wrd pos: Dir
- #9739 Wrd pos: cmnt
- #9740 Wrd num: cmnt
【#9736】 Host 2 Wrd pos: name
Set the file name display position (nth word from left) of the list displayed when the ftp command "dir"
is executed.
(Note) One word designates a character string divided by one or more spaces.
---Setting range---
0 to 100
0: Default value
【#9737】 Host 2 Wrd pos: size
Set the size display position (nth word from left) of the list displayed when the ftp command "dir" is
executed.
(Note) One word designates a character string divided by one or more spaces.
---Setting range---
0 to 100
0: Default value
【#9738】 Host 2 Wrd pos: Dir
Set the <DIR> display position (nth word from left) of the list displayed when the ftp command "dir" is
executed.
(Note) One word designates a character string divided by one or more spaces.
---Setting range---
0 to 100
0: Default value
IV - 232
Advertisement
Table of Contents
