Displaying An Arbitrary Line - Mitsubishi Electric E70 Series Instruction Manual

Move the cursor using the tab keys ( [ | ← ] : back tab/ [ → | ] : tab).
[ | ← ]key :Moves to the start of the word where the cursor is currently positioned.
If the cursor is at the start of a word, it moves to the start of the previous word.
[ → | ]key :Moves to the word after the word where the cursor is currently positioned.
Cursor destination when |
pressed
Cursor destination when |
key pressed again
(Note) Pressing [ | ← ] [ → | ]keys or [ ← ][ → ]keys does not make any difference in mass-editing.
Split display by word unit
In regular editing, program is split by word unit and displayed.
In mass-editing, program is not split by word unit and displayed as text data.

4.2.8 Displaying an Arbitrary Line

Operation method
(1) Press the menu [Line jump] .
(2) Input the line No.
(Ex.) 6 [INPUT]
(Note 1) When "0" is input, the cursor moves to the first line.
(Note 2) When "E" is input, the cursor moves to the end.
Current cursor position
key
3 N3 G00 X-300. Y-300. Z-300.;
4 N4 G01 X-200. Y-200. F2000;
: :
E70 Series Instruction Manual
Cursor destination when
pressed
The menu is highlighted.
The cursor appears at the lower input area.
The program appears with the set line No. at the head.
The cursor moves to the head.
The menu highlight returns to normal.
4.2 Program Editing
| key
I - 219