Table of Contents
Advertisement
MITSUBISHI CNC
6 Operation Panel Switch Functions
6.17.7 Interrupt Amount Reset
Interrupt amount is reset when
(1) Dog reference position return is executed;
(2) Emergency stop is released;
(3) Reset rewind or reset 2 is executed; or
(4) Reset 1 is executed when the setup parameter "#1151 rstint" is ON.
6.17.8 Operation Procedure
An operation example is given on the assumption that auto operation of XYZ axes is executed in the memory operation
mode and the Z axis is used as a handle interrupt axis.
Perform automatic operation.
Turn ON the HANDLE INTERRUPT switch on the machine operation panel.
Select interrupt axis by setting the HANDLE AXIS SELECTION switch on the machine operation
panel.
Select the travel distance per handle graduation by setting the HANDLE/INCREMENTAL
MAGNIFICATION switch.
Turn the manual handle in the + or - direction
and change the Z axis cut depth amount.
When M02 or M30 is executed, automatic operation will stop.
II - 42
Z
X
Program path
(current position
Tool path
display)
(handle interrupt display)
Handle interrupt
Advertisement
Table of Contents
