Table of Contents
Advertisement
6.1.1 Changing the Parameter Display
Changing to the computer link parameters
Press the menu change key until the menu [Link
(1)
param] appears.
(2)
Press the menu [Link param].
6.1.2 Setting the Parameters
The method of setting the parameters is explained in this section. For the setting range of each parameter, refer to
"Appendix 10 User Parameter List".
Press the menu key to select the parameter screen, and select the data to be set with the cursor key.
"8201 Axis removal" Setting Y1 axis to "1"
(1)
Press the menu [Axis param].
Use the [ ↓ ], [ ↑ ] ,
(2)
the cursor to the position to be set.
The cursor can also be moved with the menu [Param
No.] .Refer to "6.2.2 Selecting the parameter No.".
Input the value.
(3)
1 [INPUT]
and
keys to move
E70 Series Instruction Manual
The menu [Link param] appears.
The computer link parameters appears. The menu [Link
param] is highlighted.
The cursor moves to the position of the setting target data.
The current setting value is displayed in the input area.
The setting value appears, and the cursor moves.
6.1 Parameter Screens
I - 339
Advertisement
Table of Contents
