Mitsubishi Electric E70 Series Instruction Manual page 267

MITSUBISHI CNC
4 Edit Screens
(6) Press the [Check continu] key.
A block stoppage occurs when performing a
program check if the [Check continu] or [Check
step] keys are pressed while performing a
continuous check.
Furthermore, the program check is restarted if the
[Check continu] key is pressed during the block
stoppage.
The program check is reset if the [Check reset] key
is pressed while performing a continuous check.
I - 242
A program check is executed and that path is drawn.A
"Checking" message appears and the menu is highlighted.
The check counter display is updated.
The check G modal does not display.
The machining time is updated.
A "Program check completed" message appears when the
continuous check is completed.The [Check continu] menu
highlight returns to normal.