Deleting Data - Mitsubishi Electric E70 Series Instruction Manual

4.2.11 Deleting Data

Operation method (Deleting one character)
(1) Move the cursor to the character to be deleted.
(2) Press the [DELETE] key.
(3) Press the [INPUT] key.
Operation method (Deleting one line)
(1) Move the cursor to the line to be deleted.
(2) Press the [C.B] key.
(3) Press the [INPUT] key.
(Note 1) In the case where the block for the deleted line covers multiple lines, these lines are also deleted.
(Note 2) Last line only with "%" cannot be deleted.
E70 Series Instruction Manual
1 character is deleted at the cursor position, and "Editing"
appears. The data from the cursor position moves to the
left.When this key is held down, the characters can be deleted
one at a time.
The edited machining program is saved to the device and
"Editing" disappears.
1 line is deleted at the cursor position, and "Editing" appears.
The lines following the cursor position are shifted upward. The
cursor position does not change.When this key is held down,
the line can be deleted one at a time.
The edited machining program is saved to the device and
"Editing" disappears.
4.2 Program Editing
I - 221