Table of Contents
Advertisement
MITSUBISHI CNC
6 Maintenance Screens
6.6 Absolute Position Setting Screen
The Absolute position setting screen is used to set the data for the absolute position of servo axes including arbitrary NC
axes and PLC axes.
(8)
(7)
Display items
Display item
(1)
Axis name
Type of zero point
(2)
initialization
(3)
Progress state
State
Machine end
Machine posn
I - 392
This displays the axis name set with the parameter "#1022 axname2".
The axis name can be switched by [Axis select], [Next axis] or [Prev axis].
This displays the type of zero point initialisation for the selected axis.
The shortened expression of the zero point initialization method selected with the parameter
"#2049 type (type of absolute position detection system)".
Displayed
Type of zero point initialization
expression
1 Inc.
Incremental position detection system
2 With Stopper
Dogless-type
absolute position
3
No Stopper
detection system
4
5 Dog-type
Dog-type absolute position detection system 3
This displays the progress state of zero point initialisation. (Note)
This displays the distance from the mechanical basic position to the first grid point.
This displays the current machine position. "Not passed" will appear until the axis passes a grid
point for the first time.
Details
for absolute position
Machine end stopper
method
Marked point alignment
method
Marked point alignment
method II
(1)
(2)
(3)
(4)
(5)
(6)
Setting
value
Other than
1,2,3,4,
1
2
4
Advertisement
Table of Contents
