Appendix 6.5 System Alarms (Z) - Mitsubishi Electric E70 Series Instruction Manual

MITSUBISHI CNC
Appendix 6 Explanation of Alarms

Appendix 6.5 System Alarms (Z)

Z02 System error
Details
The operation result is illegal.
Remedy
- Contact the service center.
Z31 Socket open error(socket) 0001
Details
Socket open error (socket)
Remedy
Set the parameter then turn the power OFF and ON again.
Z31 Socket bind error(bind) 0002
Details
Socket bind error (bind)
Remedy
Set the parameter then turn the power OFF and ON again.
Z31 Connection wait queue error(listen) 0003
Details
Connection wait queue error (listen)
Remedy
Set the parameter then turn the power OFF and ON again.
Z31 Connection request error(accept) 0004
Details
Connection request error (accept)
Z31 Data recv error(socket error) 0005
Details
Data receive error (socket error)
Z31 Data recv error(data error) 0006
Details
Data receive error (data error)
Z31 Data send error(socket error) 0007
Details
Data send error (socket error)
Z31 Data send error(data error) 0008
Details
Data send error (data error)
Z31 Socket close error(close) 000A
Details
Socket close error (close)
Remedy
Set the parameter then turn the power OFF and ON again.
IV - 92