Table of Contents
Advertisement
MITSUBISHI CNC
4 Edit Screens
Operation method (Absolute/incremental command depending on G command)
(1)
Set "#1126 PB_G90" to "0" on the parameter screen.
Press the [Display change] key several times on
(2)
the edit screen.
Open the program pressing [Edit] and [Open] on the
(3)
edit screen.
(4)
Move the axis during manual mode.
I - 234
Incremental value mode is set.
The "playback display type" is displayed.
The menu [<--> change] cannot be used.
When the incremental value is set, the initial value is "0".
The selected program is displayed in right area.
(Note 1) When the program is not displayed in the right area,
a playback editing will not be executed.
(Note 2) When the incremental value is set, playback
movement amount will be cleared to 0 for all axes.
The axis movement amount is displayed in playback
movement amount.
In the incremental value mode, the axis movement amount by
manual mode is added to currently playback movement
amount.
When the absolute value is set, "the program position +
manual interrupt amount" is displayed as the playback
movement amount.
Advertisement
Table of Contents
