Appendix 6.3.4 Parameter Errors (S51) - Mitsubishi Electric E70 Series Instruction Manual

Hide thumbs Also See for E70 Series:

Table of Contents

MITSUBISHI CNC

Appendix 6 Explanation of Alarms

Appendix 6.3.4 Parameter Errors (S51)

S51 Parameter error 2201-2456 (Axis name)

Servo parameter setting data is illegal.

The alarm No. is the No. of the servo parameter where the warning occurred.

Check the descriptions for the appropriate servo parameters and correct them.

Even when the parameter is set to a value within the setting range, an error is occurring due to the

hardware compatibility or specifications or in relation to several other parameters.

Refer to "Parameter Numbers during Initial Parameter Error" of each drive unit instruction manual for

S51 Parameter error 13001-13256 (Axis name)

Spindle parameter setting data is illegal.

The alarm No. is the No. of the spindle parameter where the warning occurred.

Check the descriptions for the appropriate spindle parameters and correct them.

Even when the parameter is set to a value within the setting range, an error is occurring due to the

hardware compatibility or specifications or in relation to several other parameters.

Refer to "Parameter Numbers during Initial Parameter Error" of each drive unit instruction manual for