Table of Contents
Advertisement
MITSUBISHI CNC
4 Edit Screens
Use the [ ← ] or [ | ← ] key to select file setting
(1)
column A.
(2)
Designate the transfer source device and directory.
Designate the file which consists of two or more
(3)
machining programs.
Use the [ → ] or [ → | ] key to select file setting
(4)
column B.
(5)
Designate the transfer direction device (memory).
(6)
Press the menu [Program all] .
When the file name is designated, only the top
program of transfer source is stored in the
designated file.For example of "Example of "the
external device -> NC memory" of machining
program batch transfer", when "TESTCUT" is
designated as the transfer direction file name, the
top program is transferred as not "1000" but
"TESTCUT".
Press the menu [Transfr A → B] after press the
(7)
menu Return or
(8)
Press the [Y] or [INPUT] key.
When the same machining program already exists in
transfer direction device, the operation message
"Overwrite this file?(Y/N)" appears. The transferring
the following program is continued by selecting [Y]
or [N] key.
(9)
Press the menu [Compare A:B] key.
(Note 1) When programs are input in a batch to NC memory, always specify "Program batch" to NC memory directory
as transfer direction. If "Program batch" is not specified, one file is transferred (No batch).
(Note 2) When the program which is subject to edit lock exists in transfer source, the message "Edit lock B" or "Edit
lock C" appears, and transfer is interrupted. When the program which is not subject to edit lock is transferred,
delete the program which is subject to edit lock in transfer source. (Refer to "4.5.11 Edit Lock B and C".)
(Note 3) When the machining program protection is valid (KEY3 is OFF), the program cannot be transferred/verified.
(Refer to "4.5.13 Data Protect Keys".)
(Note 4) The program during automatic operation, program restart or program checking cannot be overwritten. the
operation message "Executing automatic operation", "Program restarting" or "Program checking" appears,
and transfer is interrupted.
(Note 5) If the transfer destination includes the file being edited in the custom screen, the operation message "Can't
write into being edited file" appears and the transfer may be interrupted.
I - 282
key.
The designated device and directory appear.
The designated file name appears.
The designated device name (memory) appears.
The "Program all" appears in the directory.
The operation message "OK? (Y/N)" appears.
Transmission of machining data starts. Transmitting data is
displayed in input data display column.
The operation message "Transfer complete" appears upon the
completion of transmission.
The verification of the file starts. The verifying data is
displayed. When the verification is completed, the message
appears. When the verification error occurs, the error block is
displayed in verification data display column and the operation
message "Compare error. Compare next file?(Y/N)" appears.
Advertisement
Table of Contents
