Table of Contents
Advertisement
MITSUBISHI CNC
6 Maintenance Screens
6.2.4 Comparing Files (Compare)
Operation method
Press the menu [Area change] , and select file
(1)
setting column A.
Designate the device, directory and file name to be
(2)
compared.
Press the menu [Area change] , and select file
(3)
setting column B.
Designate the other side device, directory and file
(4)
name to be compared.
(5)
Press the menu [Compare A:B].
(Note 1) Files that can be compared are text files only.
Correct outcome will not be obtained through binary file comparison.
(Note 2) "0" at the head of the file name will not be deleted when checking the individual file which consists of one
program in one file even "#8936 Delete leading 0" is set to "1". Designating the file name is required.
However, "0" at the head of the name will be deleted and checked for the serial/batch file.
(Note 3) When transferring and comparing the machining program, if the value of the user parameter "#19006 EOR
Disable" between the external devices other than between NC memory and serial differs, a comparison error
may occur.
I - 358
The designated file name appears.
The designated file name appears.
The file comparison starts. The data being compared appears
in the comparison data display column.A message appears
when the comparison is completed.If a comparison error
occurs, the block with the error is displayed in the comparison
data display column on the screen.
Advertisement
Table of Contents
