Table of Contents
Advertisement
MITSUBISHI CNC
6 Maintenance Screens
"8205 OT+" Setting X1 axis to "100.0" and Z1 axis to "200.0"
(1)
Press the menu [Axis param] .
Use the [ ↑ ] and [ ↓ ] keys to move the cursor to
(2)
the position to be set.(The row does not need to be
designated with the
Input the value.(Format: 1st row/2nd row/3rd row/4th
(3)
row)100//200 [INPUT]
(Note 1) If [PR] appears at the lower right of the screen when the parameter value is changed, the parameter value will
be validated when the power is turned ON again.
(Note 2) If the [INPUT] key is pressed without inputting a value, the cursor will move without changing the parameter
setting value.
(Note 3) If a character string, such as an axis name or input/output device name, is set in the parameter, the setting will
be cleared when 0 is input and the [INPUT] key is pressed.
(Note 4) Parameters for up to four rows, which are as currently displayed, can be set at once.
(Note 5) If the parameter value for several rows is input simultaneously, the values will be set from the currently
displayed left end no matter which row the cursor is currently at.
I - 340
and
keys.)
The cursor moves to the position of the setting target data.
The current setting value is displayed in the input area.
The setting value appears, and the cursor moves.
Advertisement
Table of Contents
