Operation method (Changing the group No.) (M system/L system)
(Ex.) Changing the group No. from 5 to 20
Use the [ ↑ ], [ ↓ ],
(1)
cursor to group No. 5.
(2)
Press the menu [Group change] key.
(3)
Set the new group No..
20 [INPUT]
Operation method (Changing to the group unit display) (M system/L system)
(Ex.) Displaying the group No. 5 tool life data.
Use the [ ↑ ], [ ↓ ],
(1)
cursor to group No. 5.
(2)
Press the menu [T-life group] or [INPUT] keys.
and
keys to move the
and
keys to move the
E70 Series Instruction Manual
The menu is highlighted.
The group No. changes to "20".
The screen changes to the group unit display and the group
No. "5" tool life management data displays.
<M sysem>
<L system>
3.5 Tool Life Management
I - 177