Table of Contents
Advertisement
4.4.9 Formatting an External Device
This section explains the method to format the external devices.
Operation method (Formatting a memory card)
(1)
Press the menu [MemCrd format] .
(2)
Press the [Y] or [INPUT] key.
(Note 1)The memory card is formatted with FAT16.
(Note 2)The volume label is set when the memory card is formatted.
Operation method (Formatting a USB memory)
First, press [USB format]. Refer to "Formatting a memory card" for more details.
(Note 1) USB memory is formatted with FAT16.
(Note 2) Only the DS formatted with FAT16 can be used.
4.4.10 List of File Names
There is a directory for each type of data in the NC memory.
The NC memory directory and file name handled on this screen is as follows.
Furthermore, when storing the NC memory file in a device other than the NC memory, be careful not to change the file
extension (.XXX).
Data type
Machining program
Fixed cycle program
A message confirming the formatting appears.
The memory card is formatted.A message appears when the
formatting is completed.
NC memory directory path
/PRG/USER
/PRG/FIX
E70 Series Instruction Manual
4.4 Program Input/Output
File name
(Program No.)
(Program No.)
I - 277
Advertisement
Table of Contents
