Operation Mode; Mdi Status; Operation Status - Mitsubishi Electric E70 Series Instruction Manual

1.3.1 Operation Mode

The selectable operation mode is following below.
Symbol
MEMORY Memory operation
TAPE Tape operation
MDI MDI operation
JOG Jog
HANDLE Manual handle
STEP Step
MANUAL Manual arbitrary feed
ZERO-RTN Reference position return
Automatic dog-less
INIT-SET
reference position return
RAPID Rapid traverse
NO MODE No operation mode

1.3.2 MDI Status

The MDI status is displayed when the operation mode is the MDI mode.
This does not appear when other operation modes are selected.
The displayed MDI status is following below.
Symbol
NON No MDI setting
SET MDI setting completed
RUN MDI running

1.3.3 Operation Status

The operation status displays the currently selected NC operation status.
Symbol
EMG In emergency stop
RST Resetting NC
LSK Paper tape reader is in label skip state
BST In block stop
HLD Operation halted
SYN Synchronizing
AUT In automatic operation
RDY Operation completed state
Details
Automatic operation is based on programs stored in the memory.
Automatic operation is based on tape command (RS232C input) programs
stored in NC tape.
Automatic operation is performed with the program set in the MDI screen.
The jog feed mode enables the axis to be moved by hand consecutively at the
feed rate set by using the MANUAL FEED RATE switch.
The handle feed mode enables the axis to be moved by turning the manual
handle. The travel distance per graduation of the handle depends on how the
HANDLE/INCREMENTAL MAGNIFICATION switch is set.
The step feed mode enables the axis to be moved by hand at feed rate when the
FEED AXIS SELECT switch is ON. The travel distance per graduation of the
handle depends on how the HANDLE/INCREMENTAL MAGNIFICATION switch
is set.
This mode enables to move manually with arbitrary amount or arbitrary
positioning position.
This mode enables a controlled axis to be returned manually to the defined
position unique to the machine (reference position).
This mode enables this mode to manually push against the machine end stopper
and carry out zero point return.
The rapid traverse feed mode enables the machine to be moved consecutively
at rapid traverse feedrate manually.
The operation mode is not selected.
Details
Details
E70 Series Instruction Manual
1.3 Screen Configuration
Explanation
Character color Background color
Black
Black
Black
Character color Background color
Red Dark gray
White Dark gray
White Dark gray
White Dark gray
White Dark gray
White Dark gray
White Dark gray
Green Dark gray
Gray
Gray
Gray
I - 7