Table of Contents
Advertisement
Menus
Menu
This edits and references the existing programs.
Open
When the program number is designated and the [INPUT] key is pressed, the
program contents appear and can be edited.
This creates a new program.
Open
When the program number is set and the [INPUT] key is pressed, a new program
(New)
is created.
This edits the MDI program.
MDI
When this menu key is pressed, the MDI program appears and can be edited.
This switches the active area between left and right editing areas.Editing can be done
<-->
change
in the active area.This menu can be used with the multi-program display type.
Line
With regular editing, when the line number is set and the [INPUT] key is pressed, the
jump
cursor moves to that line number.
With mass-editing, proving an entire program is regarded as 100%, designate the
position of the page to be displayed in percentage and press the [INPUT] key. The
% jump
program data of the designated display position is displayed on the screen. The
cursor jumps to the top line of the displayed program.
This copies the designated line (multiple lines can be copied.)
Line
copy
This menu cannot be selected during mass-editing.
This inserts the copied line at the line before the cursor.This menu cannot be selected
Line
paste
during mass-editing.
This erases the designated line (multiple lines can be erased.)
Line
clear
This menu cannot be selected during mass-editing.
In E70 series, this menu cannot be selected.
Undo
Display
This switches the display type.
change
String
When the character string is designated and the [INPUT] key is pressed, that
search
character string is searched for.
If the character string to be searched for and the character string to be replaced are
String
separated with a "/" and designated, when the [INPUT] key is pressed, the character
replace
string is replaced.This menu cannot be selected during mass-editing.
Miss
In E70 series, this menu cannot be selected.
warning
Next
In E70 series, this menu cannot be selected.
miss
The sequence No. can be added automatically by pressing the
N auto
[INPUT] key after designating an additional value.
add
This menu cannot be selected during mass-editing.
This registers the MDI program in the memory.This can be performed only when the
MDI
MDI program is displayed.
regist
This menu cannot be selected during mass-editing.
Erase
This deletes the programs. When the name of the program to be erased is
file
designated and the [INPUT] key is pressed, the designated file is deleted.
Close
This closes the pop-up window and quits this function.
Details
E70 Series Instruction Manual
4.2 Program Editing
Type
Reference
4.2.2 Editing a Machining
A
Program
4.2.1 Creating a New
A
Machining Program
A
4.2.3 Editing MDI Program
C
4.2.7 Changing the Display
4.2.8 Designating an
A
Arbitrary Line
A
4.2.14 Copying/Pasting Data
C
A
4.2.11 Deleting Data
C
4.2.12 Searching for
A
Character Strings
4.2.13 Replacing Character
A
Strings
4.2.15 Adding Sequence No.
A
(N No.) Automatically
A
4.2.3 Editing MDI Program
A
4.2.5 Deleting a File
C
I - 211
Advertisement
Table of Contents
