Table of Contents
Advertisement
MITSUBISHI CNC
4 Edit Screens
The Edit screen is used to edit the machining program (adding, erasing and changing), perform checks, and input/output
data.
4.1 Screen Configuration
The Edit screen is configured as shown below.
Left
area
Left area :The contents differ depending on the display type.
Use the [Display change] menu
Right area: Displays the program searched to be edited.
When the multi-program display type is applied, use [<--> change] menu key to switch the active area.
Menus
Menu
This edits the machining program.
This checks the program.
This is used to check the machining program without performing automatic operation.
(1)Program check (2D)This displays a graphic drawing of the machining program
movement path.
This performs the machining program input and output between the NC internal
memory and the external input/output device.
(Note) When "#8923 Hide Edit-IO menu" is "1", this menu is not displayed.
I - 208
to switch the display type
Details
Right
area
Reference
4.2 Program Editing
4.3 Program Check
(2D)
4.4 Program Input/
Output
Advertisement
Table of Contents
