Integrated Time Display - Mitsubishi Electric E70 Series Instruction Manual

Hide thumbs Also See for E70 Series:

Table of Contents

2.15 Integrated Time Display

The integrated time (date, time, power ON time, automatic operation time, automatic start time, external integrated time

1, external integrated time 2, cycle time) controlled by the NC can be set and displayed.

Note that the cycle time cannot be set. (Cycle time is display only.)

The integrated times displayed in cycle time display area on "Auto/MDI" tag can be set.

Display items

Display item

8 Cycle time

When the #3 Power ON to #8 Cycle time displays reach the maximum value (9999:59:59), the count stops,

and the maximum value remains displayed.

The current date set in the NC is displayed.

Year: 4 digits, Month: 2 digit, Date: 2 digit (YYYY.MM.DD)

The current time set in the NC is displayed with the 24-hour system. (HH:MM:SS)

This displays the total integrated time of the time from NC power ON to OFF.

(HHHH:MM:SS)

This displays the total integrated time of the work time from automatic start button pressing

in the memory (tape) mode to M02/M30 or reset button pressing (HHHH:MM:SS)

This displays the total integrated time during automatic starting from automatic start button

pressing in the memory (tape) mode or MDI to feed hold stop, block stop, or reset button

pressing. (HHHH:MM:SS)

This content differs depending on machine tool builder specification. (HHHH:MM:SS)

This displays the time that automatic operation is started from when the automatic start

button is pressed in the memory (tape) mode or MDI to when feed hold stop or block stop

is applied or the reset button is pressed.

E70 Series Instruction Manual

2.15 Integrated Time Display