Table of Contents
Advertisement
MITSUBISHI CNC
3 Setup Screens
Operation method (Display the T code list)
(1)
Press the menu [T-list].
(2)
Press the menu [T-list search].
(3)
Select the device.
[EX.] HD
Use the [ ↑ ], [ ↓ ],
(4)
cursor with the directory of target machining
program, and press [INPUT].
T code list cannot be displayed when [INPUT] key is pressed with the following programs selected;
- The program that does not exist.
- The program that is waiting to be restarted.
- The program during automatic operation.
- The program being checked.
The list window will not change.
(Note 1) When switching to the other screen, getting T code is interrupted automatically.
(Note 2) When the [Close] menu is pressed, getting T code is interrupted automatically.
(Note 3) T code list for MDI program cannot be displayed.
(Note 4) T code list acquisition is not possible for a program with 33 or more program name characters.
(Note 5) There is a model which cannot get T code list at the manual operation mode. Switch to the automatic operation
mode when T code list cannot be gotten.
(Note6)
When designating program which causes program errors, researched T codes in the previous block will be
displayed. T codes in the block with program errors are not be listed. Also, error message is not be displayed.
I - 206
PAGE
,
keys to align the
PAGE
The menu appears.
The T code list created last appears as a pop-up window. The
[Halt] menu becomes invalid.
The submenu appears. The list to select a file appears as a
pop-up window.
The selected device name and its root directory (HD:/) appears
in the directory display area.
T code list appears as a pop-up window.
Getting T code and listing starts.
The [Halt] menu becomes valid.
The [T-list search] is invalid.
Advertisement
Table of Contents
