Table of Contents
Advertisement
Operation method ("-3.000" is calculated and set in the length wear data for offset No. (102).)
Use the same procedure as (1) above to move the
(1)
cursor to the offset No. 102 length wear position.
(2)
Enter a value.
-3.000 [+INPUT]
Tool offset data + INPUT setting example
Old
Tool radius
compensation
5.0
Workpiece
Table
New
Tool length
compensation
40.0
Tool radius
compensation
5.0
E70 Series Instruction Manual
3.2 Tool Compensation Amount
The input value is added to the original value and displays.
[Ex.] 37.000 displays if the original value is 40.000. (40.000 -
3.000 = 37.000)
+ INPUT
Tool length
compensation
-3.0
Workpiece
Table
I - 123
Advertisement
Table of Contents
