Table of Contents
Advertisement
MITSUBISHI CNC
1 Operating the Setting and Display Unit
1.8.1 Displaying the Menu Function Outline
Operation method
(1)
Press the [MenuList] key.
When the [MenuList] key is pressed while editing the
file on the Edit screen, a prompt to confirm whether
to save the program appears before Menu list
window opens.
Using the[ ↑ ],[ ↓ ],[ → ],[ ← ], and page keys,
(2)
move the cursor to the menu for which the function
outline is to be displayed.
The cursor does not move to the group name.
Each cursor key motions are listed below.
[ ↑ ] Key: Cursor moves up.
[ ↓ ] Key: Cursor moves down.
[ → ] Key: Cursor moves right.
[ ← ] Key: Cursor moves left.
[PageDown] Key: Screen scrolls down.
[PageUp] Key: Screen scrolls up.
(Note 1) The cursor moves in the same way even when the
(Note 2) The cursor moves in the same way even when the
1.8.2 Directly Moving to the Menu Function
Operation method
(1)
Press the [MenuList] key.
Using the [ ↑ ],[ ↓ ],[ → ], [ ← ] , and page keys,
(2)
move the cursor to the menu to move to.
(3)
Press the [INPUT] key.
I - 18
The Menu list window appears showing the selected screen's
menu list at the top.
The function outline for the selected menu appears.
The function outline does not appear if a menu with no name is
selected.
key is pressed.
key is pressed.
The Menu list window appears showing the selected screen's
menu list at the top.
The function outline for the selected menu appears.
The selected menu function can be moved to directly.
The menu is not moved to if a menu with no name is
selected.The Menu list window closes after moving.
Advertisement
Table of Contents
