Mitsubishi Electric E70 Series Instruction Manual page 396

Data format (System configuration data)
System configuration data format is as follows.
Contents of the data are same as that of displayed in the system configuration screen and drive monitor screen of the
diagnosis screen.
[COMMON]
FILE=ASSEMBLY
DATE=04.11.01
TIME=15:30:00
NC_TYPE=MITSUBISHI CNC E70L
(1) NC unit configuration
(2) H/W configuration
(3) Servo drive unit information
(4) Spindle drive unit information
(5) Power supply unit information
(6) S/W configuration
(7) Ladder configuration
[F_END]
[Output example]
[COMMON]
FILE=ASSEMBLY
DATE=04.11.01
TIME=15:30:00
NC_TYPE=MITSUBISHI CNC E70L
[FILE]
TYPE=NC_UNIT
NC_NAME=FCA70P-2E
UNIT_NAME=FCU7-MU558
NC_SN=M1234567890
[END]
[FILE]
TYPE=HARDWARE
[DATA1]
HW_NAME=HN768
REVISION=A
[DATA2]
:
[DATAn]
HW_NAME=HN441
REVISION=A
[END]
:
[FILE]
:
[END]
[F_END]
Data & time of system configuration data
output
NC type
Same as "H/W config" screen
Same as "H/W config" screen
Same as "Servo unit" screen
Same as "Spindle unit" screen
Same as "Power unit" screen
Same as "S/W config" screen
Same as "Ladder config" screen
Tag described at the top of the file
Header information of the file (file type)
File output date
File output time
NC type and Lathe(L)/Machining center(M)
Tag described at the top of the data
Data type (NC unit configuration)
Describe items and data
Tag described at the end of the data
Data type (H/W configuration)
Repetitive data No. tag (1st)
Describe items and data
Repetitive data No. tag (2nd)
Repetitive data No. tag (n-th)
Describe items and data
Tag indicating file end
E70 Series Instruction Manual
6.2 Input/Output Screen
I - 371