Table of Contents
Advertisement
MITSUBISHI CNC
2 Monitor Screens
2.21 Spindle, Standby Display
The current spindle tool No. and the standby tool No. are displayed.
(1)
(2)
(3)
Display items
Display item
(1)
Spindle standby
(2)
Tool No.
(3)
-D
Menus
Menu
Magazn
1
Switch the spindle or standby display for each magazine.
:
This menu is switchable only when the parameter "#11054 Sp-stby disp
:
type" is set to "1".
The selectable menu differs according to the specifications of the machine.
Magazn
5
Close
This closes the pop-up window and quits this function.
Switching the magazines
Only when the parameter "#11054 Sp-stby disp type (Spindle-standby display type)" is set to "1", the magazine
displayed on the Spindle standby can be switched.
(1)
Press the menu [Sp-stby].
(2)
Press the menu [Magazn 2].
I - 112
The display contents differ depending on machine tool builder specification.
This displays No. of tool that is attached to the spindle or standby position.
The spindle/standby display for each magazine complies with the setting value of the parameter
"#11054 Sp-stby disp type".
For D data function and purpose, refer to the instruction manual issued by the machine tool
builder.
Details
Details
Type
B
C
Spindle/Standby of [Magazn 1] is displayed.
Spindle/Standby of [Magazn 2] is displayed.
Reference
Advertisement
Table of Contents
