Appendix 7.3 Variable (Common Variables, Local Variables) - Related Operation Messages; Appendix 7.4 Plc Switch-Related Operation Messages; Appendix 7.5 Compensation-Related (Tool Compensation, Coordinate System Offset) Operation Messages - Mitsubishi Electric E70 Series Instruction Manual

Hide thumbs Also See for E70 Series:

Table of Contents

MITSUBISHI CNC

Appendix 7 Operation Messages

Appendix 7.3 Variable (Common variables, local variables) - related

Operation Messages

Erase? (Y/N)

Set up parameter ?(Y/N)

Appendix 7.5 Compensation-related (Tool compensation, coordinate

system offset) Operation Messages

Erase? (Y/N)

Clear all axes? (Y/N)

Cannot return to origin

Clear all? (Y/N)

Input P number

Data clear complete

Execute the collection data clear?

- Message to confirm the line erase.

[Y] or [INPUT]: Variables are deleted.

[N]: Variables are not deleted.

- Message to confirm the parameter setup.

[Y] or [INPUT]:It will be possible to make settings.

[N]:It will not be possible to make settings.

- Message to confirm the erasing.

[Y] or [INPUT]: Erase the data.

[N]: Do not erase the data.

- Message to confirm the all axes clear.

[Y] or [INPUT]: Clear the data for all axes.

[N]: Do not clear the data.

- Operations other than line paste, paste and data input cannot be undone.

- It is the initial state. Cannot undo.

- It cannot be undone if the previous setting is set in another part system.

- The last operation was performed in other screen. Cannot undo the operation.

- Message to confirm the clearing the all data.

[Y] or [INPUT]: Clear all data.

[N]: Do not clear the data.

- The coordinate system [Coord G54.1 P] menu was pressed.

- The expansion workpiece coordinate system P No. was input.

- Clearing of the collection data is complete.

- Determines whether to clear the collection data. Press [Y] or [INPUT] to clear