Table of Contents
Advertisement
MITSUBISHI CNC
4 Edit Screens
Difference of drawing by combination of "CoordinateSystem" and "Coord Select"
By combination of the drawing coordinate system (CoordinateSystem) and the workpiece coordinate system selection
(Coord Select), the drawing at 2D check changes as follows.
<Example>
[Workpiece coordinate]
G54: X 100.000 Y 100.000 Z 0.000
G55: X 200.000 Y 200.000 Z 0.000
Drawing coordinate
system selection
All wk. coord
Workpiece
coordinate system
G55
I - 246
Drawing by G55
Drawing by G55
[Machining program]
N1 G28 XYZ
N10 G90 G54 G0 X100. Y100. Z100.
N11 G91 G01 X-100. F500
N12 Y-100.
N13 X100.
N14 Y100.
N15 Z-100.
N16 Y-100.
N17 Z100.
N18 G0 Y100. Z-100.
N19 G01 X-100. F500
N20 Z100.
N30 G28 XYZ
N40 G90 G55 G0 X200. Y200. Z200.
N41 G91 G01 X-100. F500
N42 Y-100.
N43 X100.
N44 Y100.
N45 Z-100.
N46 Y-100.
N47 Z100.
N48 G0 Y100. Z-100.
N49 G01 X-100. F500
N40 Z100.
N50 G28 XYZ
M30
%
Drawing at 2D check
Workpiece coordinates G54 and
G55 both are drawn.
Drawing by G54
Workpiece coordinate G55 is
drawn. G54 is not drawn.
Advertisement
Table of Contents
