Mitsubishi Electric E70 Series Instruction Manual page 264

Display item
Currently executed
machining program
(8) Main O10...
Sub O1234...
(9) Buffer display
Drawing coordinate
(10)
settings display
Menus
Menu
This performs a check search.
Check
Select a program to perform a check for from the program file list displayed
search
in the pop-up window.
Check
This checks the program continuously.
continu
Check
This checks the program per block.
step
Check
This resets the program check.
reset
This erases the graphics displayed on the screen.
Each time this menu is pressed, the graphic data is erased in the order of
rapid traverse and cutting feed.
Erase
When the graphic is drawn after setting "#1231 set03/bit2" to "1", pressing
this button again will erase whichever a path of rapid traverse or cutting feed
at once.
This changes the graphic drawing display range.
Press this menu to display the menu for changing the display mode.
Display
range This changes the display range and erases the graphic data displayed on the
screen.
This changes the drawing plane.
Press this menu to display the menu for changing the display mode.
There are 3 types of graphic drawing display mode: 1-plane, 2-plane, and 3-
Display
mode dimension.
This changes the drawing plane and erases the graphic data displayed on
the screen.
All
This switches the normal display mode and the full-screen display mode.
display
This displays the machining program being checked on the graphic drawing
Program
area.
display
This menu can be selected only when the full-screen display mode is applied.
3D
In E70 series, this menu cannot be selected
check
Opt
In E70 series, this menu cannot be selected.
Skip
This sets the viewpoint angle for the 3-dimension display mode.
This changes the viewpoint angle and erases the graphic data displayed on
the screen.
Rotate
However, this menu cannot be used for other than the 3-dimension display
mode.
The display range (scale and display position) is automatically set from the
machine movable area. The machine movable area is set with the
Std
parameters "#2013 OT-" and "2014 OT+" (software limit).
range
When the display range is changed, the graphic data displayed on the screen
is erased.
This displays the device name, program number, sequence number, and block number
currently being executed.
This displays the sub-program device name, program number, sequence number, and block
number for the sub-program currently being accessed.
This displays the contents of the machining program currently being checked.The block being
executed is highlighted.
This displays the current selected drawing coordinate settings.
Details
E70 Series Instruction Manual
4.3 Program Check (2D)
Details
Type
C
4.3.1 Checking
Continuously
B
4.3.2 Checking One
B
Block at a Time
4.3.3 Cancelling the
C
Program Check
C
4.3.6 Changing the
C
Display Range
4.3.7 Changing the
C
Display Mode
B
4.3.10 Switching to
Full-screen Display
Mode
B
4.3.8 Changing the
C
Display Angle
C
Reference
I - 239