Table of Contents
Advertisement
MITSUBISHI CNC
2 Monitor Screens
Display items
Display item
(1)
Counter display
(2)
G modal simple display
(3)
Cycle time display
Completed workpiece
(4)
display
Machine status animated
(5)
display
(6)
M, S, T, B commands
(7)
Speed display
(8)
Spindle/Wait display
(9)
Load meter display
I - 36
This displays the counter of the relative position and workpiece coordinates positions, etc.
If each axis is in a specific position or status, the following status symbol appears.
#1 to #4 : No. 1 to No. 4 reference position
][ : Servo OFF state
MR : Mirror image
>< :Axis removed state
CT : Auxiliary axis state
Whether to allow for the tool length compensation and tool radius compensation can be set
with the parameter "#1287 ext23/bit4".
Whether to display the axis counter can be set by the parameter "#1069 no_dsp".
When the parameter "#11057 Counter diam axis" is set to "1", the axis name of the
diametral axis is highlighted.
The layout of counter display can be changed by the parameter.
(Refer to "2.1.1 Counter Display" for details.)
This displays the modal status.
[8.4-type]
G command modal status of Group 1
G command modal status of Group 3
Selected workpiece coordinate system
Tool radius compensation modal, offset No. shape compensation amount, tool radius wear
amount
Tool length compensation modal, compensation axis name, offset No., shape
compensation amount, tool length wear amount
This displays the automatic operation time and cycle time.
The displayed items are switched with integrated time window.
This displays the number of workpieces which have been completed.
The display follows the machining parameters "#8001 WRK COUNT M" to "#8003 WRK
COUNT LIMIT".
This displays the current tool No., tool type, next command movement direction, coordinate
rotation status, mirror image status, and spindle rotation direction/coolant status.
Note that the spindle rotation direction/coolant status display differ according to the
machine tool builder.
This displays the values command for M (miscellaneous function command value), T (tool
command value), B (2nd miscellaneous function command value), S (spindle command
rotation speed) and a number of workpiece machining times.
The displayed number of M (miscellaneous function command value) depends on
parameter "#12005 Mfig".
The displayed number of T (tool command value) and B (2nd miscellaneous function
command value) is "1" regardless of the parameters "#12009 Tfig" and "#12011 Bfig".
However, the display/non-display of B (2nd miscellaneous function command value)
depends on parameter "#1170 M2name".
Refer to "Manual numerical value command" for the manual numerical value commands.
For lathe system, parameter "#11038 T disp type (tool command value) switch" determines
whether to displays tool command value only, or tool command value combined with tool
No. and offset No.
This displays the S command and spindle actual rotation speed value about S (spindle
command rotation speed).
S command is always displayed. However the spindle rotation speed might not be
displayed by screen area constraints.
In interpolation feed:
This displays the vector direction speed currently being moved in.
In each axis independent feed:
This displays the speed of the axis with highest speed.
The actual machine feedrate is displayed with the parameters "#1125 real_f".
The spindle tool No. and the standby tool No. are displayed.
These displayed contents differ according to the machine tool builder.
The spindle load and Z axis load, etc., are displayed in a bar graph.
If Spindle/standby display is not being used, a load meter can be displayed in the Spindle/
standby display area. These displayed contents differ according to the machine tool
builder.
Details
Advertisement
Table of Contents
