Switching To Full-Screen Display Mode - Mitsubishi Electric E70 Series Instruction Manual

Hide thumbs Also See for E70 Series:

Table of Contents

MITSUBISHI CNC

4 Edit Screens

4.3.10 Switching to Full-screen Display Mode

Press the [All display] menu key to display the program check window on the whole screen. (full-screen display mode).

Press this menu again to return the normal display.

Switching the display mode

Normal display mode

(Note 1) The selected display mode is maintained even after rebooting the machine.

(Note 2) The full-screen display mode is applied to the trace function and program check (2D solid) function commonly.

(Note 3) When auto graphic is valid, the graphic is drawn after the drawing's scale is automatically adjusted to the scale

to draw the entire machining program (the area of about 90% of the drawing area).

Displaying a program

When pressing the [Program display] menu key, the contents of the machining program on checking is displayed on the

drawing area.

When pressing the [Program display] again, the displayed program is erased.

Note that this menu can be used only when the full-screen display mode is selected.

(Note 1) The selected display mode is maintained even after rebooting the machine.

(Note 2) The program display mode is applied to the trace function and program check (2D) function commonly.

(Note 3) The [Program display] menu key cannot be selected while the normal display mode is selected.

Program display mode is valid only when the full-screen display mode is selected.

Full-screen display mode