Table of Contents
Advertisement
MITSUBISHI CNC
6 Maintenance Screens
Press the menu [Area change] to select file setting
(1)
column A.
(2)
Designate the transfer source device (memory).
(3)
Press the menu [Dir] - [Program all] .
Do not specify the file name. If the name is specified,
an error will occur.
Press the menu [Area change] key to select file
(4)
setting column B.
Designate the transfer direction device and
(5)
directory.
Designate the transfer direction file to input multiple
(6)
machining programs.
When the file name is not designated, output to the
file "ALL.PRG" of the designated directory.
(7)
Press the menu [Transfr A → B].
(8)
Press the [Y] or [INPUT] key.
When the same machining program already exists in
transfer direction device, the operation message
"Overwrite this file?(Y/N)" appears. The transferring
the following program is continued by selecting [Y] or
[N] key.
(9)
Press the menu [Compare A:B] key.
(Note 1) When programs are output in a batch from NC memory, always specify "Program batch" to NC memory
directory as transfer source. If "Program batch" is not specified, the program is transferred by one program per
one file.
(Note 2) When the programs which are subject to edit lock exists in NC memory, those file is not transferred. (The files
are transferred excluding those files.) The verification is executed excluding the programs which are subject to
edit lock. (Refer to "6.2.11 Edit Lock B and C".)
(Note 3) When the machining program protection is valid (KEY3 is OFF), the program cannot be transferred/verified.
(Refer to "6.2.13 Data Protect Keys".)
(Note 4) When the transfer direction is serial, the program is similarly transferred even if source of following case 1 and
case 2 is set.
Device name
Directory
File name
I - 380
The designated device (memory) appears.
The "Program all" appears in the directory.
The designated device name and directory appear.
The designated file name appears.
The operation message "OK? (Y/N)" appears.
Transmission of machining data starts. Transmitting data is
displayed in input data display column.
The operation message "Transfer complete" appears upon the
completion of transmission.
The verification of the file starts. The verifying data is
displayed. When the verification is completed, the message
appears. When the verification error occurs, the error block is
displayed in verification data display column and the operation
message "Compare error. Compare next file?(Y/N)" appears.
Case 1
Memory
Program batch
(Null)
Case 2
Memory
Program
* (Wild card)
Advertisement
Table of Contents
