Table of Contents
Advertisement
MITSUBISHI CNC
3 Setup Screens
The setup screen is used to make tool and workpiece related settings, set user parameters, edit the MDI, set the counter,
and perform manual numerical value commands.
3.1 Screen Configuration
The setup screen is configured as shown below.
(1)
(2)
(3)
Display items
Display item
(1)
Counter display
(2)
M,S,T,B Command
(3)
Spindle/Standby display
I - 116
This displays the relative position and machine position counter.
Up to 5 axes can be simultaneously displayed.
The following status symbols display if each of the axes are in a set position or status.
#1 to 4: Reference position 1 to 4
][: Servo OFF status
MR: Mirror image
><: Axis removed
CT: Auxiliary axis state
It is possible to set whether to consider the tool length and diameter compensation using
parameter "#1287 ext23/bit4".
Whether to display the axis counter is set by the parameter "#1069 no_dsp".
This displays all command values for M (support function command value), S (spindle
command rotation speed), T (tool command value) and B (2nd miscellaneous function
command value). The spindle command rotation speed displays only 1st spindle.
The presence (absence) of the 2nd miscellaneous function command value is designated
using parameter "#1170 M2name".
Refer to "3.10 Manual Numerical Value Commands" for details.
The current spindle tool number and standby tool number can be displayed according to
the PLC program specifications. (The numbers do not display in the screen if not created
with the PLC program.)
The contents of this display differ based on the machine tool builder specifications.
Details
Advertisement
Table of Contents
