Table of Contents
Advertisement
(Note 1) When changing the display range in the 2-plane display mode such as "XY/XZ", the display range (scale and
display position) for the upper and lower areas changes in the same manner.
The operation method is the same as the 1-plane display mode.
The white-framed display range in the upper and lower areas simultaneously move to the left/right when the
[Left], [Right] keys are pressed.
The white-framed display range of either upper or lower areas moves up and down when the
[Up], [Down] keys are pressed.
Which frame to be moved up/down can be changed with the page key.
Operation method (Centering)
(1)
Press the [Display range] key.
Zoom
Zoom
in
out
(2)
Press the [Centering] key.
(Note 1) In the 2-plane display mode such as "XY/XZ", centering is applied for the upper and lower areas.
The operation method is the same as the 1-plane display mode.
Up
Down
Left
Right
A white frame indicating the display range appears on the
screen.
The display range input mode is activated, and the following
menu appears.
Center-
ing
The display position is changed so that the current machine
position appears in the center of the drawing area.
When display position is changed, the graphic data displayed
on the screen is erased.
E70 Series Instruction Manual
2.5 Trace
I - 73
Advertisement
Table of Contents
