Table of Contents
Advertisement
3.2.1.3 Erasing the Tool Compensation Data
Operation method (Erasing one line of tool compensation data at the cursor position)
Move the cursor to the line to be erased with the [ ↑
(1)
],
[ ↓ ],
and
keys.
(2)
Press the [Line clear] and [INPUT]menu.
(3)
Press the [Y] or [INPUT] key.
To cancel the erasing, press a key other than [Y] or
[INPUT].
Operation method (Erasing the compensation data from offset No. 122 to 125.)
(1)
Press the [Line clear] menu.
(2)
Input the offset No. of the data range to be erased.
122/125 [INPUT]
(3)
Press the [Y] or [INPUT] key.
Press a key other than [Y] or [INPUT] in order not to
erase the data.
(Note) If the [INPUT] key is pressed without selecting an offset No., the line where the cursor is located is erased.
E70 Series Instruction Manual
3.2 Tool Compensation Amount
The cursor appears at the data item of the selected offset No.
The menu keys are highlighted and a message displays
confirming whether it is okay to erase.
The background color of the data to be erased displays in light
blue.
The selected line of data (one line amount) is cleared to zero.
The data erased to zero displays at the top of the
compensation data.
The menu is highlighted.
A message box displays to confirm whether it is okay to erase
the data.
The background color of the data to be erased displays in light
blue.
The compensation data for the selected offset No. is erased,
and the menu highlight returns to normal.
The data cleared to zero displays at the top of the
compensation data.
I - 125
Advertisement
Table of Contents
