Table of Contents
Advertisement
MITSUBISHI CNC
1 Operating the Setting and Display Unit
1.3 Screen Configuration
(1)
(6)
Display items
Display item
(1)
NC name
(2)
Power ON request
(3)
Operation status
(4)
MDI status
(5)
Screen name
(6)
Operation status
(7)
Alarm
(8)
Operation message
(9)
Time
I - 6
(2)
(3)
(4)
The currently displayed NC name (name set in parameter "#1135 unt_nm") is displayed.
This appears if a parameter requiring the power to be turned ON again has been changed.
This flickers at an approx. one-second interval.
The operation mode is displayed.
The MDI status is displayed when the MDI operation mode is selected.
This does not appear when other operation modes are selected.
The tag for the currently selected screen is selected and displayed.
The NC operation status is displayed.
The currently occurring alarm or warning with the highest priority is displayed.
The operation message is displayed.
The current time is displayed. (Hour: minute)
(5)
Details
(7)
(8)
(9)
Advertisement
Table of Contents
