Table of Contents
Advertisement
MITSUBISHI CNC
2 Monitor Screens
2.17 Local Variables
The details of the local variables are displayed
Local variables 1 to 33 are prepared for each user macro subprogram call level. Up to 33 local variable data items are
displayed on one level. A 5-level configuration from level 0 to level 4 is used in page order. If there is a local variable
command or an argument designation called by the user macro subprogram in the block, and that block is executed first,
the set variable value (variable name) will be displayed.
(1)
(2)
(3)
(4)
Display items
Display item
(1)
Execution level
(2)
Display level
(3)
Variable No.
(4)
Variable value
I - 102
This displays the nest level of the subprogram control called by the user macro.
0 : Not in user macro call state
1 : User macro call level 1
2 : User macro call level 2
3 : User macro call level 3
4 : User macro call level 4
This displays the nest level of the local variable displayed in the area.
This displays the local variable No.
The alphabetic character before the local variable No. is the argument code. G, L, N, O and
P cannot be used as arguments, and thus not displayed.
There are 33 local variables (1 to 33) for each user macro subprogram call level.
This displays the local variable value.
If the variable data is "blank", the display will be blank.
An exponential is displayed when a 7 digits are set in the integer section and 5 digits or
more as set in the decimal section.
(Example)1234567 → 1.2346E+006, 0.00001 → 1.0000E-005
(Note)When the setting is "blank", the setting will be handled as "0" in the calculations.
However, when the conditional expressions EQ or NE are used, the blank will not be
handled as "0".
Details
Advertisement
Table of Contents
