Mitsubishi Electric E70 Series Instruction Manual page 270

Select the type of workpiece coordinate system to draw (When selecting all workpiece coordinates, or coordinate
system G54-59)
(1) Press the menu [All wk. coord].
Select the type of workpiece coordinate system to draw (When selecting the coordinate system G54.1P)
(1) Press the menu [Coord G54.1P].
(2) Input "20", and press the [INPUT] key.
E70 Series Instruction Manual
In the area to show the setting of the coordinate system to
draw, "All Work" is displayed.
In the same manner, by pressing a menu between [G54] and
[G59], in the area to show the setting of the coordinate system
to draw, the selected workpiece coordinate system is
displayed.
The operation message "Input P number" is displayed.
The menu is highlighted.
The input area is enabled.
In the area to show the setting of the coordinate system to
draw, "G54.1P20" is displayed.
4.3 Program Check (2D)
I - 245