5.8.2 Executing NC Data Sampling
Sampling is started when the menu [Samp start] is pressed.
Operation method (Executing NC data sampling)
(1)
Set sampling condition and data.
(2)
Press the menu [Samp start].
(Note 1) The sampling will not end even if transferred to another screen in sampling.
(Note 2) The data set in this function will not be output to the parameter.
(Note 3) The contents of "State" is returned to "Sampling stop". (The parameters related to NC data sampling is
maintained.)
(Note 4) The data is displayed in 16 digits. However, the data can be set up to 8 digits.
E70 Series Instruction Manual
The sampling starts and the menu cannot be selected.When
the sampling end condition is satisfied, the state will be
"Sampling stop". The menu [Samp start] can be selected.
5.8 Data Sampling Screen
I - 327