Table of Contents
Advertisement
MITSUBISHI CNC
2 Monitor Screens
Operation method (Setting the origin)
(1)
Press the main menu [G92 set].
Using the [ ↑ ] , [ ↓ ] , or keys, move the cursor to
(2)
the axis to be set.
(3)
Input 0, and then press the [INPUT] key.
If the [INPUT] key is pressed without inputting a
value, zero (0) will be set.
(Origin zero)
(4)
Repeat step (3) for each axis.
For axes that are not to be operated, press the [ ↓ ]
key and move the cursor.
(Note)
An error will occur if a value other than 0 is set.
Operation method (Canceling the origin)
Press the main menu [G92 set], and then press the
(1)
menu [Origin cancel].
(2)
Press the [INPUT] key.
(3)
Repeat step (2) for each axis.
For axes that are not to be operated, press the [ ↓ ]
key and move the cursor.
I - 88
The relative position counter opens as a pop-up window.
The menu [Origin set] is highlighted.
The cursor appears at the 1st axis of the relative position
counter.
The cursor moves.
"0.000" appears at the cursor position.
The cursor moves to the next axis.
The pop-up window closes when the origin has been set for the
last axis.
The relative position counter opens as a pop-up window.
The menu [Origin cancel] is highlighted.
The cursor appears at the 1st axis of the relative position
counter.
The same value as the machine position appears at the cursor
position.
The cursor moves to the next axis.
The pop-up window closes when the origin has been canceled
for the last axis.
Advertisement
Table of Contents
