Schedule System Maintenance Tasks - Digi IX20 User Manual

System administration

Schedule system maintenance tasks

You can configure tasks to be run during a specified maintenance window. When the device is within
its maintenance window, firmware updates and Digi Remote Manager configuration checks will be
performed.
You can also schedule custom scripts to run during the maintenance window. See
run automatically
Required configuration items
Events that trigger the maintenance window to begin.
n
Whether all configured triggers, or only one of the triggers, must be met.
n
The tasks to be performed. Options are:
n
Firmware updates.
l
Digi Remote Manager configuration check.
l
Whether the device will check for updates to the device firmware.
n
Whether the device will check for updates to the modem firmware.
n
The frequency (daily, weekly, or monthly) that checks for firmware updates will run.
n

Web
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
IX20 User Guide
for more information.
Schedule system maintenance tasks
Use Digi Remote Manager to view and manage your
Configure scripts to
1035