6 Operation
6.19 Uploading data to an external device
Requirement
Result
212
EN
MEDUCORE Standard
via Bluetooth
®
Bluetooth
®
•
The Bluetooth
activated
(see "13.12 System settings", page
•
An external device with a Bluetooth
System for digital patient data recording) is within range.
•
The user menu is activated
menu", page
252).
1. Select the Bluetooth
When doing so, please note:
•
The Bluetooth
out as long as the printer is printing.
•
During Bluetooth
connect to a printer.
®
2. Start Bluetooth
3. If the device and the external device are not yet paired: Check
whether the PIN displayed on the device is shown on the
external device.
4. If the PIN displayed on the device and on the external device are
identical: Confirm the pairing on the device and the external
device.
Device and external device are paired.
5. If the device is ready for Bluetooth
completion of Bluetooth
6. Finish Bluetooth
button.
®
Bluetooth
data transmission between the device and the external
device has been set up. Device data have been uploaded to the
external device.
2
®
interface (only with
data transmission option)
data transmission option is enabled and
(see "10.1 Navigating the user
®
data transmission menu item.
®
data transmission menu item is grayed
®
data transmission, the device cannot
data transmission on the external device.
®
®
data transmission.
®
data transmission using the Finish function
342).
®
interface (Example:
data transmission: Await