Table of Contents
Advertisement
1 Introduction
10
EN
MEDUCORE Standard
•
Pulse oximetry: Pulse oximetry monitoring allows continuous,
non-invasive measurement of arterial oxygen saturation with
the aid of different pulse oximetry sensors for different
application sites. At the same time, a photosensor in the pulse
oximetry sensor registers the percentage of oxygenated
hemoglobin in the arterial blood (SpO
wavelengths. In addition, the pulse oximetry sensor registers
pulse rate. The values for SpO
display numerically, the plethysmogram in the form of a curve.
•
Non-invasive blood pressure measurement (NIBP monitoring):
NIBP monitoring allows measurement of blood pressure on a
limb in adults, children, and infants. Measurement is based on
oscillometric blood pressure measurement technology. After
the measurement has been carried out, systolic and diastolic
blood pressures are shown numerically in the display in mmHg.
The device has the following therapy functions:
•
Manual defibrillation and cardioversion: Based on the
information displayed by the ECG, the user decides whether it
is necessary to deliver a shock. If a shock is necessary, the user
can select the shock energy, charge the device for shock
delivery, and trigger the shock manually.
•
Semi-automatic defibrillation: In AED mode, the device guides
the user through resuscitation by means of audio and visual
instructions. The device determines the resuscitation sequence.
The device automatically carries out an ECG analysis and, if
necessary, charges for electric shock delivery. The shock is
triggered manually by the user.
2
) using different light
2
and pulse rate are shown in the
2
Advertisement
Table of Contents
