Connection To Ventisupport; Enter Device Data; Test Temperature Calibration And Calibration Status - Weinmann BiLevel-ST VENTImotion WM 24800 Service And Repair Instructions

Connection to VENTIsupport

1. Plug the plug of the power supply cable into a socket.
2. Have the test protocol to hand.
3. Connect the serial interface of the therapy device to the PC via the converter box.
4. Start the VENTIsupport program.
5. Click on the
VENTIadjust
6. Note the set therapy parameters.

4.4 Enter device data

• Enter the type, number and date of manufac-
ture of the device in the test protocol.

4.5 Test temperature calibration and calibration status

Note
This test is not needed, as it can only be per-
formed on a Weinmann test bench.
14
Test the device
item in the menu bar.