Table of Contents
Advertisement
6. When the LED on the power supply unit and charger is green:
Result
The printer battery is fully charged.
4.7.2 Inserting the printer battery
Requirement
•
•
Risk of injury from electric shock when simultaneously
touching a printer and the patient!
Simultaneously touching a printer and the patient may lead to an
electric shock and injure the patient.
Stand clear of the patient if the printer is out of its case.
1. Turn over the printer.
2. Insert the printer battery in the battery compartment of the
Take the printer battery out of the charging station for the
printer battery.
Alternatively:
If the FULL CHARGED LED is green: Take the printer battery out
of the quadruple charging station for the printer battery.
The printer battery is fully charged
printer battery", page
The printer is switched off.
printer until you hear it engage.
(see "4.7.1 Charging the
94).
MEDUCORE Standard
4 Preparation
2
EN
97
Advertisement
Table of Contents
